ARC welding machine Maintenance

2024-01-18 14:31

Please perform maintenance while cutting off power

1) Regular dust removal, using dry and clean compressed air for cleaning. If using a welding machine in high smoke and polluted air, perform dust removal treatment at least once a month.

2) Compressed air should be reduced to the required pressure to avoid damaging the small components inside the welding machine.

3) Check the internal electrical connections to confirm good contact (especially connectors), reinforce loose contacts, and if there is oxidation, remove the oxide film with sandpaper and reconnect.

4) Avoid water ingress or moisture inside the welding machine, otherwise blow dry during use. Measure the insulation condition with a megohmmeter (including between connection nodes and between connection points and the casing). Only after confirming that there are no abnormal conditions can welding work continue.

5) If the welding machine is not used for a long time, it should be placed in its original packaging and stored in a dry environment.

3.jpg